KwixsetClick on image to enlarge
Portland cement based, Non-shrink, Non-metallic grout for use in interior or exterior glazing applications (wet or dry locations). *Important – Kwixset must not come in contact with unprotected aluminum or laminated glass.
Product Details Part # Description G42-10402 Grout for use in interior or exterior glazing applications (wet or dry locations)
RockiteClick on image to enlarge
Gypsum based, Non – Shrink, Non- Metallic grout for use in interior glazing applications (dry locations only).
Product Details Part # Description G42-10051 Grout for use in interior glazing applications (dry locations only)
Aluminum Base Drain BlockClick on image to enlarge
Placed under exterior installed base shoes to provide drainage space for water runoff. Great for balconies and decks. 10 blocks per package.
Product Details Part # Description Measurement CAD Drawing Cut Sheet Length Width Height A42-0013-10 Drain Block for Base Shoes with 2-1/2" or 1-1/4" Width 2 1/4" x 2 1/2" x 1/2" 2-1/2" 2-1/4" 1/2"
Steel Weld BlockClick on image to enlarge
Welded to steel substrate to allow base shoe to be fastened using machine screws. Usable with both 0072 and 0073 Panel Grip shoe profiles.
Product Details Part # Measurement CAD Drawing Cut Sheet Ø S42-0013-10 2 1/4" x 2 1/2" x 1/2" 1/2" - 13 Tapped Hole
Setting Block for Base SectionsClick on image to enlarge
Setting block supports and protects glass when fitted in the base section and is available for both 1/2” and 3/4” glass. Easily center glass in base shoe and support panels during expansion cement installations. We recommend two 4” pieces located at quarter points along the bottom of each panel. Resilient EPDM provides durability and longevity, is stocked in 25’ coils, and can be cut to any size.
Product Details Part # Description CAD Drawing Cut Sheet V50-0002BKA25 Setting Block for 1/2” Glass V50-0006BKA25 Setting Block for 3/4” Glass
Spacer BlocksClick on image to enlarge
Die cut, high density foam spacing and sealing pads with adhesive on one side to act as spacers. 1/4" thick x 3 7/16" tall.
Product Details Part # Description CAD Drawing Cut Sheet V50-0010 For 1/2" Glass V50-0011 For 3/4" Glass
Stainless Steel AdhesiveClick on image to enlarge
SS High Strength Fixative.
Product Details Part # Description R19-1331-000-00 Stainless Steel Adhesive, 1.69 fl oz
Plustar High Bond Cladding Tape
Product Details Part # Description CAD Drawing Cut Sheet Length Width Height V50-0012 Adhesive tape to attach cladding to base shoe. Use 1 - 3 rows 108 ft. Roll .75" .0625"