- PanelGrip® 0073 Dry Glaze System Data Sheet
- PanelGrip® Installation Video
- PanelGrip 0073 Fascia Mount Testing Report
- PanelGrip 0073 Testing Report – Miami Dade, FL
- Building Code Testing – California - PanelGrip 0073 Testing - California Building Code
- Building Code Testing - PanelGrip 0073 Florida
- Base Shoe Cut Sheet A42-0072-No-Handrail
- Base Shoe Cut Sheet A42-0072
- Base Shoe Cut Sheet A42-0073
- PanelGrip 0072 Narrow Base Calculations
Stainless Steel U-Channel Top Cap
Stainless Steel U-Channel Top RailClick on image to enlarge
Use with Protective Insert for 1/2” tempered glass only, part number V50-0001BKA10.
Product Details Part # Finish CAD Drawing Length Width Height Glass Size(T) Gauge Cut Sheet S16-0134 VEL, POL 10' 0.874" 1.75" 1/2" temp., 9/16" lami. 16/.063" S16-341316BRU10 10' 1-1/8" 1-3/4" 3/4" Tempered or 13/16" Laminated 16/.063"
Protective Insert for Top RailsClick on image to enlarge
Rigid vinyl protective insert is compatible with 1/2” monolithic glass. Providing a protective barrier, the insert protects glass panels when fitted inside top rail as well as aiding in alignment during installation. Stocked in 10 ft. lengths. These vinyl inserts are not compatible with 1 1/2” bump formed top rail.
Product Details Part # Description CAD Drawing V50-0001BKA10 Top Rail Insert for 1/2” Monolithic Glass
Stainless Steel U-Channel 90 Degree ElbowClick on image to enlarge
90 degree elbow attaches to S16-0134 top cap using a S16-0134CS connector sleeve on each side.
Product Details Part # Description Finish CAD Drawing S16-0134HH90 90 Degree Elbow for Stainless Steel Top U-Channel #4 Brushed (V) or #8 Polished (P)
Stainless Steel U-Channel End CapClick on image to enlarge
End caps are to be welded or glued to the end of S16-0134 Top Cap.
Product Details Part # Description Finish CAD Drawing S16-0134EC End Cap for Stainless Steel U-Channel #4 Brushed (V) or #8 Polished (P)
Stainless Steel U-Channel Connector SleeveClick on image to enlarge
Use S16-0134CS to connect to change of direction elbows or to connect two pieces of S16-0134 top cap.
Product Details Part # Description CAD Drawing Cut Sheet S16-0134CS Stainless Steel Top Cap Connector Sleeve